Xhorse Multi-Prog and SOP44 Adapter Connection
To connect Xhorse Multi-Prog programmer to an SOP44 adapter (such as the VH24 or VH30 adapter board), you need to swap the internal default adapter board inside the device. Step-by-Step Connection Guide 1.Open the Device: Remove the magnetic shield on the top of Multi-Prog unit. Unscrew the four screws securing the default VH13 interface adapter board that comes pre-installed. 2.Remove Default Adapter: Gently pull up on the pins of the VH13 board to detach and remove it from the internal slot. 3.Solder the Chip: Solder your target SOP44 flash memory chip (e.g., AM29F400BB) onto the designated pinout position on the SOP44 adapter board. 4.Install SOP44 Adapter: Insert your SOP44 adapter board (like the VH24 or VH30) into the slot of Multi Prog Ensure it is firmly connected and properly aligned in the upper-left corner of the socket area. 5.Reassemble Shell: Put the magnetic shield and housing back securely. Learn more: http://blog.xhorsetool.com/how-to-read-and-wr...
