Honda Civic FD 2006-2011 New Remote Added by VVDI Key Tool Max

 Xhorse VVDI Key Tool Max Pro comes with an OBDII cable can generate and program remote same as Key Tool Max and Mini OBD Tool. It has been tested and confirmed that both of them work with VVDI XNHO00EN wireless remote key successfully adding new remote to Honda Civic FD 2006-2011 46 chip 433MHZ.

1.VVDI Key Tool Max Pro Generate and Program remote on Honda Civic FD 2011

Original remote chip 46 on board 433MHZ

Generate with VVDI XNHO00EN remote (HONDA wireless)

Connect Key Tool Max Pro to the vehicle’s OBDII port via the OBD cable

Step 1: Generate remote

Tap remote program>> HONDA>> CIVIC FD>> civic FX_433_ID46 2161 (433.92 FSK)

Put VVDI XNHO00EN remote into the signal coil of KEYTOOL Max Pro

Then press ‘Generate Remote’

Wait a moment to write data

Burn success

Generate again with VVDI XNHO00EN remote

Burn success as well

Step 2: Program remote

Turn on the ignition switch on with working key

The green security light goes off after the ignition is turned on

Tap IMMO PROGRAMMING>> HONDA>> CIVIC>> Immo system-46 (2006-2011)

Press ‘IMMO programming’

Select ‘Add a key’

Just follow the on-screen instruction to operate step by step

Turn off ignition switch

Insert the working key and switch ignition on

Turn off ignition switch

Turn on the ignition switch. If no response within 10 seconds, turn off/on the ignition switch again

Turn off ignition switch

Insert the new key and switch ignition on within 15 seconds

Turn off ignition switch

Turn on ignition switch

Check if the indicator light is out

Now is YES

Turn off ignition switch and then turn on

Program completed

The new remote can start the car, and remote function automatic working after programming chip

 

2. VVDI Key Tool Max with Mini OBD Tool Generate and Program Remote on Honda Civic FD 2008

Connect Mini OBD Tool into the vehicle’s OBDII Port

Use VVDI XNHO00EN remote (HONDA wireless)

Step 1: Generate remote

In Key TOOL MAX menu

Tap Vehicle remote>> HONDA>> CIVIC FD>> civic FX_433_ID46 2161 (433.92 FSK)

Put VVDI XNHO00EN remote into the signal coil of KEYTOOL Max Pro

Then press ‘Generate Remote’

Burn success

Step 2: Program remote

Use the working key to turn ignition switch on

Move to Mini OBD Tool menu

Connect VVDI Key Tool Max with Mini OBD Tool via Bluetooth

Tap IMMO PROGRAMMING>> HONDA>> CIVIC>> Immo system-46 (2006-2011)

Press ‘Start EXECUTION’

Select ‘Add a key’

Then follow the on-screen instruction to operate step by step

The steps programmed by Key Tool Max and Mini OBD are the same as Key Tool Max Pro.

Program remote successfully and the remote works good.

Done!

www.xhorsetool.com