VVDI BE Key Pro Yellow PCB+ Autel IM608 Pro Add Benz W207 Key
The new released VVDI BE Key Pro Yellow Version comes with the same PCB as VVDI BE Key Pro Green and covers the functions. The difference is that the PCB color and yellow PCB is without 200 bonus points (which is equal to 1 BGA token). Therefore, the price is relatively cheaper. It has been confirmed to working well with Autel IM608 Pro to add Mercedes-Benz key.
Check the test video on Benz W207.
https://youtu.be/YVBE6RoxAlc
Operation process with word& image:
Install VVDI BE Key Pro Yellow PCB with the 3 button key shell
Connect Autel IM608 Pro to the vehicle properly
Insert the Xhorse VVDI BE Key Pro into EIS to test, doesnāt work
Go to IM608 tablet
Tap IMMO>> Accept the disclaim>> Mercedes- Benz>> Automatic selection
Read VIN automatically
Confirm the vehicle info
Tap 2008-2014>> Hot function>> Add key (guided)>> On bench>> Auto scan
Detect the current EIS type is W207
Follow the on-screen instruction to perform key adding:
- Read EIS data
- Read ignition key information
Insert the ignition key into the IR keyhole on the Autel IM608 Pro programmer
This ignition key is a smart key, press Yes to continue
Confirm the IMMO status (the existing keys number is 4 and key is smart key)
- Read blank key information
Put the VVDI BE Key Pro close to the IM608 programmer remote reception position and press any button of the key
Insert this blank key into the IR keyhole on the programmer
- Obtain key password
There is not a key password, press OK to enter password calculation process
Insert the ignition key into the EIS and wait for 5s
Pull the ignition key out
Insert the ignition key into the EIS and wait for 2s
After pulling the ignition key out, insert it into the IR keyhole on the programmer
Collecting data and calculating password
Calculate password successfully
Insert the ignition key into the EIS and wait for 30s
Password calculation is completed
- Generate key file
Insert the blank key into the IM608 Pro programmer IR keyhole
Detecting key
- Write BE Key file
Key addition is completed
- Test if new key works normally
The test result is the Xhorse VVDI BE Key Pro yellow PCB added Benz key successfully with Autel IM608 Pro key programmer.
Comments
Post a Comment