Xhorse Dolphin XP005 Error Code 29 Solution

 Here share the solution to resolve Xhorse Dolphin XP005 Error Code 29.

Problem:

Use Dolphin XP005 to cut key, it cannot cut the key normally. Try the height level adjustment, X axis motor test and Z axis motor test, all fails and get the error code: 29. I also do a conductivity test, the cutter and clamp is ok, but probe and clamp always shows testing.

Xhorsetool.com engineer replied:

The milling cutter shorted out, please follow the following post to check

Xhorse Dolphin XP005 probe and milling cutter abnormal conductivity detect method

After that, clean the iron filings inside.

Tech support:

www.xhorsetool.com