VVDI2 with VVDI prog to do spare key to Passat 2010
This is the procedure to help do a spare key to a Passat 2010 (optional solutions)
Method George Alin used:
Remove CCM(comfort) module .read 95320 eeprom … make dealer key … learn key on car ..Done
if it’s a spare deffo through OBD can get 7th byte from working key.
i like to be 100% covered that’s why i choose that method.
Method Jerry King used:
Read cs and pin from vehicle.
Go to transponder tools , find 7th byte with existing key.
Put in the 6 it pulled and insert the old key to find the 7th.
Write the 7 bytes to new key.
Go back to VW tool and write that key.
Go to diagnostics , comfort module program remote.
The entire job takes 5 minutes or less you do not need to pull anything.
My experience applies to USA market only.
Method Jimmy Sadler used:
You can clone the chip then program the remote
The easiest and quickest method for a spare.
It separate from Chip and remote program separately
the chip is in side of the remote just open it up you will see the chip
Method Craig Bowie used:
Comments
Post a Comment