VVDI Mini Key Tool copy Jaguar XF key

Q: I tried to copy a key for my Jaguar XF with VVDI Mini Key Tool, but I failed. Can you help me to solve it?

A: Of course. Tips and guides for you as below.


You need:

Jaguar XF

Jaguar XF original car key

Transponder 46

Other auxiliary tool

Xhorse VVDI Mini Key Tool

(you can buy it from http://www.cardiagtool.co.uk/vvdi-mini-key-tool.html)



Tips and guides to copy Jaguar car key with mini key tool:

Take out the original car key battery before starting sensor copy process

Open Xhorse App,

Connect mini key tool with mobile phone

Then select Transponder Clone




Put the original car key into coil to detect




Detect transponder information, Type: Transponder 46




ID46 online calculation shown as following picture




Detect key

Sniffer data

Insert the original car key to turn on the ignition switch and sniffer data

Turn off the ignition switch of the car and detect data with mini key tool again.

Note: If not smart key, insert the original car key, turn on and off the ignition switch. Remove the original car key. Repeat that step until you are prompted to collect the data.

If it is a smart key, take out the smart key battery, put the smart key close to the induction area, turn on and off the ignition switch, then remove the key. Repeat that step until you are prompted to collect

Take out original key and put VVDI special chip to write data

Then put VVDI special chip into the empty BMW car key

Insert the BMW car key to turn on the ignition switch of the car successfully

Finally, use the original car key to boot the car and it also works well.